Different types of acacia wood pallets vary in forklift orientation, whether they are open or closed, and whether they have undergone export treatment — not in terms of "beauty" or "ugliness". Hoang Gia Company manufactures these pallets from acacia wood in Ho Nai, Dong Nai.

This article helps in purchasing pawns. a main type for warehouse. Pallet definition is located at What are acacia wood pallets?The wrong type can cause vehicles to get stuck or goods to slip through the gaps between the slats.

4-way acacia wood pallet

Four-way acacia wood pallets for vehicle access. all four sides, usually thanks to the support legs. For large warehouses, retrieving goods from the end, and loading containers, the front side needs to be rotated.

Pros: Reduces pallet rotation. Cons: More complex processing; poorly grooved joints are weak and prone to punctures. There are "four-way grooving" types — forklifts can access from four sides, and hand trucks sometimes only access the two openings. This is clearly stated on the order.

Available code: 4-way acacia wood pallets.

Closed-face pallets and open-face pallets

Closed-sided pallets have tightly joined slats, so small items don't easily slip through. Open-sided pallets have gaps between the slats, are lighter, use cheaper wood, and can still support large boxes.

For small packaged food items and loose components: a sealed side is preferred. For large bags, bricks, and rolled sheet metal: an open side is usually sufficient.

Export-quality acacia wood pallets

Export-grade acacia wood pallets are pallets that have been treated with ISPM 15 (heat-dried or fumigated) and stamped with the IPPC mark. It's not just about "looking a little nicer." Domestic pallets are not required to have this mark.

Pallet dimensions must match the receiving country: EU or 1,200 × 800 mm; Asian containers are typically 1,200 × 1,000 mm; US or 48 × 40 inches. See ISPM 15 wood processing for export and Fumigated acacia wood pallets for export..

EPAL size 1 (800 × 1,200 mm) is different from pallets authorized to bear the EPAL mark. Please clarify before printing the declaration form.

Custom-made acacia wood pallets

Custom pallets are built to exact specifications when standard pallets don't fit the racking, fork, or port tolerances. They are not cut to approximate the exact dimensions of pre-made pallets.

Recording in mm, 2/4 dimensions, single-sided/double-sided, static/dynamic loading, fumigation. Custom pallet manufacturing.

Which one should I choose?

Choose based on cart, shelving, and gate—not based on factory routine.

• Single-axis, large container, domestic → 2-way, open surface, 1,200 × 1,000 mm.
• Warehouse with multiple entrances or rotating containers → 4-way access.
• Small items are easily dropped → closed surface.
• At the border crossing → add ISPM 15, correct water surface for receiving.
• Deviation from the standard → machine it yourself, don't pre-cut it.

We need a large batch of one size: Supply pallets in bulk. Quote: contact or 0988526168.

Frequently Asked Questions

Which is more common: 2-way or 4-way pallets?

In small warehouses, one-way and two-way entrances are common because they are simple to install. Larger warehouses and container yards often switch to four-way entrances. There is no "always right" solution for every factory.

Can open-sided pallets be used to support food products?

It's fine if the goods are in sealed containers with the bottom larger than the slat gaps. For loose goods or small bags, use the sealed side. For cleaning wet storage areas: wood is not as washable as plastic.

Does one order contain a mix of different types of acacia wood pallets?

Mixing is possible, but it's easy to mix things up in the warehouse, and the shelves might be misaligned during lifting. So, one type should be the main one, and a second type should only be used in other areas.

Can export pallets also be used domestically?

It works. There's only an additional ISPM processing fee of 15 if it doesn't go through customs. Split the shipment into domestic lots if you want to reduce costs.

Does ordering a custom item take longer than ordering a ready-made item?

It usually takes longer because the factory processes orders based on samples, not taking from existing stock. Items in stock with the exact product code shown on the product page will be shipped faster than if they are still in stock.